Steve Adler Passes Away! RIP Friend

Tomorrow Tuesday March 15th we will be opening late (1pm) since we will be attending Steve Adler's Service at the St. Cyprian Church 4714 Clark Ave Long Beach, CA 90808.

Board Builder, Craftsman, Surfer, and all around incredible guy Steve Adler passed away last Thursday March 11, 2010. Steve was a lifelong friend and he had the idea to start Foam E-Z. He presented the concept to me on the way home from an evening mountain bike ride at El Morro. Within a couple of weeks of that bike ride we began Foam E-Z in May of1993. Foam E-Z and I would not be what we are today without Steve's involvement. Adler was an accomplished board builder having built his own brand under The Surfboard Board Factory name. Recently he was working with Tim Stamps helping to develop Stamps SUP line. Steve was incredibly involved in the SUP World and a business partner with Jodie Nelson in the SUP Spot.

Check out Steve's Facebook Page for more information on this incredible person. A college fund for his only son Clark has been set up at Farmers & Merchants Bank. Checks should be made out to CLARK ADLER, please still write Clark Adler in the memo. All payments can be mailed in or dropped off at any Farmers & Merchants Bank

He will be dearly missed by everyone who had the chance to meet or spend any time with him. It is hard to believe that he is gone.

RIP

Brad, the Nadell Family, and the entire Foam E-Z Crew.

Gore Vent Plugs, A High Tech Epoxy/EPS Solution!

The newest high-tech product to the Foam E-Z family is the Gore Vent Plug. Now you can stop worrying about your EPS/Epoxy or Hollow Wood surfboard gassing and blowing up! It is the only vent on the market that is made entirely by W.L. Gore. The W.L. Gore design has the membrane bonded around the circumference using a very specialized process. This vent "breathes" constantly alleviating the need to open and close it. Or in worse case, your board soaking up water since you forgot to close it! The vent will flow 40 ml/minute max, and SUP's over 10' or hollow boards should use two (mid-board & near tail). Originally Gore designed this vent for sealed military electronics, so it meets very stringent spec's for a saltwater environment. This vent isn't an immunity to heat problem with EPS and Hollow Wood, and customers should understand that boards still cannot be left in the sun; especially upside down on your surf racks.

The Gore Vent Plugs come in two models:

Glass-In version is designed to be installed under the glass, directly into the foam.

Retro-Fit version is designed to be installed after the board has been glassed.

The Gore Vent Plugs are not cheap at $26.95, but are a great investment for your EPS/Epoxy or Hollow Wood surfboard especially if you want your board to last.

Check out the Gore Vent Plug Installation Manual for the correct directions on installing your Plug.

These plugs are another example of Foam E-Z's effort to carry the highest quality, made in the USA, surfboard building tools and products available. Feel free to let us know if you don't see something you're looking for on our site, most items are only a day away! We're open to all suggestions and comments so please let us know how we're doing.

Thanks for your support-

Brad