The 5-10RP Fish Blank by US Blanks

We've been waiting for this one since Clark Foam went out of business in December 2005! The 5'10"RP by US Blanks just arrived in our shop and we're stoked to have it. This polyurethane fish plug was shaped by San Diego legend Rich Pavel. He is one of the experts and innovators in the revolution of the Fish board. Rich has been deeply involved in the "Fish Fry" events around the world which are his inspiration for this blank. The blank is versatile enough to be able to shape short high performance fish as well as traditional fish boards up to 5'10". This blank is thick enough to yield 2-3/4" if you're trying to recreate an old school design.

Come in the shop and check them out.

See you soon-

Brad

FCS FUSION PLUGS!

We just got the Fusion Plugs in and they seem to be a nice alternative to the usual FCS Plugs. The Fusion Install Kit makes it extra easy to install teh plugs the correct way. Here is a link to the FCS Fusion Install Manual http://www.foamez.com/pdfs/Fusion_Manual_Final_Rev3.pdf

FCS created the Fusion because of a need for a high quality, easy to install system, that can be installed under the fiberglass (as preferred by boards using new technologies such as EPS). This also provides the consumer a higher performing fin system that fits the worlds largest range of premium fins.

The insert provides a base of high density foam. This helps disperse any forces on the plug. It provides a solid base so the plug does not rotate or sink into the foam. This is especially evident in EPS blanks of low densities.

The slots in the Fusion plugs are slightly elongated which allows slight fore and aft movement of the fins, this is great for fine tuning the performance of the board.

The FCS Fusion offers 3 different cant angles (0º, 5º, 9º): This makes the system easy to install and minimizes the chance of error in fin angles.

We appreciate any feedback you can give us on new products.

ProBox is in full force here at Foam E-Z!

If you're looking for ProBox fins, boxes, install kits etc... we now have it all in stock and can be found on our website under Fins & Fin Systems. If you can't find the fins you're looking for call or email us and we can have them here for you usually within two days.

ProBox addresses many of the shortcomings of existing systems in the surfboard marketplace. Adjustments can be made to the fin position forward and backward and the cant [fin angle]. These adjustments allow the performance of a surfboard to be tuned to the conditions, type of surfboard or rider. The fin cant is adjusted through a revolutionary patented insert mechanism that provides controlled angles, initially 4 different inserts are provided 0°, 4°, 6°, and 8°.

This fin system is very easy to install with a minimum of tooling. A single reusable jig is used to handle the alignment, routing, and anchoring of the box during the installation process. No fin is required to install the box as the jig correctly locates the box on the board while suspending it over the routed hole. These jigs are extremely inexpensive and reusable!

Shaping Supplies 15% Off Sale

In celebration of our 15 years in business we are having a month long sale! Each week a different product category will be highlighted and all customers will be able to save fifteen percent (15%) on that category. This week, from Sunday May 11th thru Saturday May 17th, the sale category is SHAPING SUPPLIES. Customers can either come into the shop to make the purchase or you can purchase online with the redemption code 15YRSHAPE2. Look for a new category and redemption code next Sunday May 18th. Stay tuned, it’s gonna be a great month!



The Guys at www.FoamEZ.com

Foam E-Z 15 YR Anniversary Party!!!

Come join us at our 15 Year Anniversary Party Event from 11-3pm on Saturday May 31st. It will take place behind our shop and will include: Giveaways, Raffles, Food/Drinks, Board Building Demos, and a Storewide 15% off Sale. All of our vendors will be present to answer questions and chat about anything you have in mind. Future Fins will be installing boxes into a shaped blank which then will be glassed with Composite Resource UV Polyester Resin and the board will ready to sand with in an hour and a half. Ocean & Earth will be raffling off pads, leashes, and more. US Blanks will have a van full of Seconds (blanks) for sale at a reduced price. Sol Sunguard will be giving away lots of killer sunscreen and lip balm. Many “pro” shapers will be present including Tim Stamps (Stamps Surfboards). ProBox Larry has graciously donated a variety of fin and box setups for the raffle. The raffle will also include Epoxy donated from Resin Research. This list will be growing as the month goes on so stay tuned.

You won’t want to miss this. It will be a great opportunity to talk shop, get some free shwag, and eat some free grub.

See you there!

The Guys at Foam E-Z

The Newest HULL Creation From The Guys @ Foam E-Z

Inspired by all the Hull craze these days, we at Foam E-Z decided to try our hand at building one. We decided to make a 6 foot stubby, based on the Greenough Velo and the Fineline Geebee. The bottom of the board is hulled out with a slight V in the tail. The board is glassed with double 4oz BGF cloth on top and single 4oz BGF cloth on bottom. It has a 10.5" Fin Box 10" up from the tip of the tail. The final dimensions of the board are 6' 20" nose x 23" wide x 18". We're currently testing it and will report back.
RadRob

The NEW Foam E-Z Fin section!

In an effort to carry a wide selection of fins, we have dedicated a large section of Foam E-Z (shop) that has everything from a 6" cutaway to a 10" Velzy pivot fin. Each fin is selected by us here at Foam E-Z with the idea that everyone surfs differently, and has a different idea of what fin they want to run in their board. We recently received some new L-Flex fins to add to our selection, and keep up with the Hull craze that seems to be sweeping over Southern California. Feel free to stop on by, call, or email and our knowledgeable staff will be happy to help you select your next fin.

The Guys at Foam E-Z

BYOB Build Your Own Board!